Skip to content
Snapline

Paint Calculator

Gallons of paint for the walls, and the ceiling, of a room.

Unit system

The total area to leave out. Leave empty to paint the whole wall.

Two is our starting point. Your paint can may call for more.

Printed on the can. Sherwin-Williams gives about 350 to 400 ft² per gallon. We start at 350.

Examples: ,

??

Enter room length, room width and ceiling height to see how much paint you need.

Short answer

Find the wall area: the distance around the room times the ceiling height, minus the doors and windows. Multiply by the number of coats and divide by the area one gallon covers. Round up to a whole gallon.

On this page

How do I use the paint calculator?

  1. Enter the length and the width of the room, and the height of the ceiling.
  2. Add the total area of the doors and windows if you will not paint them. Leave it empty to paint the whole wall.
  3. Choose whether to paint the ceiling too, and enter the number of coats and the coverage printed on your can.
  4. Read the gallons. The calculator also shows how many to buy, rounded up to a whole gallon.

How is the paint worked out?

The calculator finds the area to paint, then how much paint covers it.

  • WallsWalls = 2 × (L + W) × H − o
  • CeilingCeiling = L × W, only if you choose it
  • Area to paintArea = Walls + Ceiling
  • PaintPaint = Area × n ÷ c
  • To buyBuy = Paint, rounded up to a whole gallon

Coverage is for one coat, so the area is multiplied by the number of coats.

What the symbols mean
SymbolMeaningUnit
LLength of the roomft (m)
WWidth of the roomft (m)
HCeiling heightft (m)
oDoors and windows, total areaft² (m²)
nNumber of coatscount
cCoverage of one gallon, per coatft²/gal (m²/L)

Worked example

A room 14 feet by 12 feet with 8 foot walls and 40 square feet of doors and windows, painted with 2 coats at 350 square feet per gallon.

You enter
Room length14' 0"
Room width12' 0"
Ceiling height8' 0"
Doors and windows (optional)40.0 ft²
Paint the ceiling too?No, walls only
Coats2
Paint coverage350 ft²/gal
You get
Paint needed2.15 gal
To buy, rounded up3 gal
Area to paint376 ft²
Walls, openings left out376 ft²

A common mistake

Entering doors and windows that add up to as much as the walls, or more. The calculator stops, says how much the openings take and how big the walls are, and asks for a smaller area. Check that you typed the total area of the openings, not their number, and that the unit is square feet.

How much does a gallon cover?

Sherwin-Williams says a gallon of paint typically covers about 350 to 400 square feet. It adds that, depending on wall texture and the coverage you want, having a little more than a gallon on hand may be best. The can for your product gives the real number, so type it into the calculator.

We start at 350 square feet per gallon, the low end of that range, so the answer leans toward buying a little more paint. It is a starting point you can change.

The table shows the 14 × 12 ft room with 8 ft walls and 40 square feet of openings, at both ends of that range.

Paint for the example room, walls only
CoverageCoatsPaint neededTo buy
350 ft²/gal (8.6 m²/L)11.07 gal2 gal
350 ft²/gal (8.6 m²/L)22.15 gal3 gal
350 ft²/gal (8.6 m²/L)33.22 gal4 gal
400 ft²/gal (9.8 m²/L)10.94 gal1 gal
400 ft²/gal (9.8 m²/L)21.88 gal2 gal
400 ft²/gal (9.8 m²/L)32.82 gal3 gal

How many coats should I plan for?

Two coats is our starting point, and it is a judgment, not a rule. Your can may call for more, so follow the instructions on it. The coverage on the can is per coat, so the calculator multiplies the area by the number of coats.

What about the ceiling?

The calculator leaves the ceiling out unless you choose it. The ceiling is the length times the width of the room, and it gets the same number of coats as the walls. Trim, doors and window frames are not included.

The example room, 2 coats at 350 ft²/gal
PaintedAreaTo buy
Walls only376 ft²3 gal
Walls and ceiling544 ft²4 gal

Frequently asked questions

How many gallons of paint do I need for a room?

Find the area of the walls, leave out the doors and windows, multiply by the number of coats, and divide by how many square feet a gallon covers. A room 14 by 12 feet with 8 foot walls and 40 square feet of openings has 376 square feet of wall. Two coats at 350 square feet per gallon take 2.15 gallons, so you buy 3.

Should I leave out the doors and windows?

If you will not paint them, yes. Measure each one, add up the areas, and enter the total. The calculator takes it off the walls. If you leave the field empty, it paints the whole wall. Trim, doors and window frames are not part of the count.

How do I find the area of the walls?

Add the length and the width of the room, double it to get the distance around, and multiply by the ceiling height. Subtract the doors and windows. That is the wall area for one coat.