Skip to content
Snapline

Tile Calculator

How many tiles, and how many boxes, for a floor or a wall.

Shape
Unit system

The width of the joint between tiles. Leave empty for none.

Covers cuts and breakage. Diagonal layouts and large tiles need more.

Printed on the box.

Examples: ,

??

Enter length, width, tile width and tile length to see how many tiles you need.

Short answer

Divide the area by the space one tile takes, which is its size plus one grout joint on each side. Add extra for cuts and round up. For boxes, divide the tiles by the number in one box and round up again.

On this page

How do I use the tile calculator?

  1. Pick Length and width, or Known area if you already measured the space.
  2. Enter the size of one tile, the width and the length. The label on the box gives both.
  3. Enter the grout joint if you know it. Leave it empty for tiles that touch.
  4. Keep the extra at 10%, or change it. To see boxes, type the number of tiles in one box.

How are the tiles counted?

The calculator divides the area by the space one tile takes, then adds extra. It works by area and does not plan the layout.

  • AreaArea = L × W
  • Space per tileSpace = (w + g) × (h + g)
  • TilesTiles = round up (Area × (1 + x ÷ 100) ÷ Space)
  • BoxesBoxes = round up (Tiles ÷ n)

Round up means to the next whole number. Boxes show only when you enter n.

What the symbols mean
SymbolMeaningUnit
LLength of the spaceft (m)
WWidth of the spaceft (m)
wWidth of one tilein (cm)
hLength of one tilein (cm)
gGrout jointin (mm)
xExtra for cuts and breakage%
nTiles in one boxcount

Worked example

A floor 12 feet by 10 feet, with 12 inch tiles, no joint, 11 tiles to a box and the default 10% extra.

You enter
ShapeLength and width
Length12' 0"
Width10' 0"
Tile width12"
Tile length12"
Extra for waste10%
Tiles per box (optional)11
You get
Tiles needed132
Boxes12
Tiles, before extra120
Area to cover120 ft²

A common mistake

Typing the tile size in the wrong unit, such as 72 inches for a 7.2 inch tile. The calculator stops when one tile covers more than the whole space and says so, so check the unit next to the tile size. A tile that is longer than one side of a narrow space is fine, because it is cut.

How does the grout joint change the count?

Each tile takes up its own size plus one joint, so a wider joint means fewer tiles for the same floor. The effect is bigger on small tiles, where there are more joints, so enter the joint when you know it.

The table counts the tiles for 120 square feet of floor with the default 10% extra.

Tiles for 120 ft² of floor, by tile size and joint, with 10% extra
TileNo joint1/16 in1/8 in1/4 in
4 × 4 in1,1881,1521,1181,053
6 × 6 in528518507487
12 × 12 in132131130127
24 × 24 in33333333

How much extra tile should I buy?

We found no authoritative figure for tile. The percentages that stores and tile makers publish differ, and they tend to be higher for diagonal layouts, patterns such as herringbone and large tiles. Our 10% is a default for a simple floor, not a standard. Change it to fit your layout, and ask your installer.

120 ft² of 12 in tile at different levels of extra (examples, not advice)
ExtraTiles
0%120
10%132
15%138
20%144

How do boxes work?

Tile is sold by the box, so the calculator rounds up to whole boxes when you give it the number of tiles in a box. Check that the tiles in your boxes come from the same batch, because the shade can differ from one batch to another.

Frequently asked questions

How many 12 by 12 tiles do I need for 100 square feet?

A 12 inch tile covers 1 square foot, so 100 square feet takes 100 tiles before any extra and any grout joint. Enter your own tile size, joint and extra above to get the exact number.

Do I enter the tile size with or without the grout joint?

Without it. Enter the size printed on the box, and the joint separately. The calculator adds one joint to each side of the tile.

Should I buy a spare box?

If you can, keep a few tiles for repairs. A tile from the same batch matches better than one bought years later. Our extra covers the cuts and breakage of the job itself.